I don't know if you are familiar with the pipe cutting machine. In fact, the workers who install the pipes are very familiar. So what exactly is the pipe cutting machine, what functions? What is the working principle? The following small series helps you summarize some related knowledge.
The automatic pipe cutting machine can automatically clamp, feed, feed, size setting, fixed stop and work metering. The main circuit of the machine works with a PLC programmable logic controller. Automatic feeding, clamping and cutting system, accurate and fast feeding, can cut 10-50 times per minute. The counter can set the number of times of cutting, and automatically stops when the cutting is completed. There is no need for manual operation, higher mechatronics, and even one person can operate multiple units, reducing staff. The total counter counts the workload record for one day. The total pressure, front, back, and pressure can be adjusted without any step to ensure that the workpiece is not pinched and deformed. The servo Pipe Cutting Machine is used, and the length accuracy of the pipe is guaranteed to be within plus or minus 0.05 mm (the error is mainly generated on the steel pipe and the tool). ), the cut gloss is burr-free.
Types of
1, manual
European high-strength machine head, equipped with high-efficiency worm and worm gear drive, which makes the aluminum cutting speed rate high, no noise, no burrs. The feed is manual, the head can be rotated 45° left and right, the angle is clearly cut, and the 45°-90-45° parameter column is added to make adjustment easier. It is equipped with manual two-way clamp, automatic cooling system and hand. Debug the gear.
2, pneumatic
The pneumatic double-sided clamp of the pneumatic pipe cutting machine makes the workpiece smooth and the cut surface is smooth and free of burrs. Low noise and low pollution during sawing. The cutting is accurate and the speed exceeds the band saw and the hacksaw, and the cut surface is smooth and not hot, saving secondary processing. The nose can be adjusted to the left or right for beveling or milling. The angle is accurate and the tube cut is perfect. The circulating cooling system has a large capacity oil storage barrel to ensure the life of the saw blade and the flat surface.
The above knowledge about the pipe cutting machine, I do not know how much knowledge everyone has learned after reading. In fact, this knowledge is very helpful for many people who are not familiar with what is a Pipe Cutting Machine, so everyone should take a good look at the above knowledge.
