The tower clock is not only a clock that can be timed, but also has a decorative role, I believe that many friends have seen some buildings installed on the tower clock, so not only convenient for us to see the time, but also aesthetic. Therefore, tower clocks are installed in many tourist attractions or some colleges and universities. The installation of the tower clock also has to consider many factors, so this also determines the installation of the tower clock is also different.
Wall-mounted installation: generally suitable for some small specifications, not high hanging tower clock;
Integral installation method: Generally used for tower clocks, the clock face of the building tower clock is built directly from earth.
Semi-embedded installation mode: the wall hole is required to be larger than the clock body, but smaller than the front edge of the clock, and it is similar to the wall hanging type from the outside after installation;
Embedded installation method: The whole clock body is embedded in the wall, requiring close coordination between the wall and the clock body, generally reserving large wall holes, and then making up for the fine cracks after the bell is embedded.
Through the above introduction, we found that the installation of the tower clock is divided into four categories: wall-mounted installation, integrated installation, semi-embedded installation and embedded installation, and the specific choice of which installation method needs to be determined according to the actual situation. For some larger tower clocks, it is necessary to consider the installation and maintenance factors. The movement is generally removed during maintenance, and issues such as removing the movement at the back of the clock are also considered.
