The Operation Mode Of Building Tower Clock Is Introduced

Jun 04, 2024

Leave a message

Building tower clock manufacturers Building tower clock can choose songs, language, dot 3 ways of free combination, the system is composed of control board and external drivers and additional equipment. The control board is composed of dual CPU system design, and the control board can run automatically or manually. The control board memorizes the clock parameters after power failure, and automatically tracks the needle to the current Beijing time after power failure. Control panel The system works reliably regardless of whether GPS can receive satellite signals. Under normal circumstances, the control board can deal with the deviation of the clock module for a long time by itself, and it will automatically correct and time Beijing Standard time according to the operation of a certain time. It takes about 45 minutes for the two pins to complete the high-speed chase.

Manual setup operation can handle complex unexpected situations and bring the clock system into normal operation as soon as possible. The front panel of the control board is composed of display function keys and display lights. The front panel is a page for man-machine communication. The back of the case is equipped with a terminal block for connecting devices. View the graphics of the front panel of the control panel: Operation process: First install the minute hand and the hour hand overlap at 12 o 'clock; After the control board is connected with the driver and auxiliary equipment as required, the check is correct, and the power can automatically enter the waiting state.

The needle moving system of the electromechanical tower clock is mechanical, and the automatic control system is sub-clock. The tower clock is a sub-clock, which receives the pulse signal sent by the high precision mother clock on time, indicates the time according to the servo motor driving needle mechanism, and runs with the mother clock. The chimes or songs are transmitted by tape or system control. The mechanical tower clock uses the heavy hammer as the power source, indicates the time according to the mechanical transmission to push the needle mechanism, and tells the time according to the specially cast "clock".

Send Inquiry