Today, the tower clock manufacturer will introduce the importance of lubricating oil on the tower clock core. Let's take a look at the specific analysis of tower clock manufacturers!
As the power output organization of the tower clock, the tower clock core plays a leading role in the service life and precision of the tower clock. Most of the watch core of the tower clock used at this stage is worm gear transmission mechanism. Under normal circumstances, the main engine driven by the worm wheel and worm core is required to change the oil after 3 months to most half a year of operation. In the process of oil change, it will be found that there are a lot of worm gear materials in the oil pool to wear the fine powder deposited, so we can not ignore the necessity of oil on the watch core.
Parts and transmission gear joints need grease lubrication, in the day and night travel process, the mutual friction of the transmission gear will consume grease, if not timely added oil, the transmission gear friction will increase, the formation of metal slag will hinder normal operation, the use of time is too long, there will be dust deposition, long-term past may reduce the use period. Therefore, it is necessary to clean the watch core on time, and oil the watch core parts.
The role of oil on the watch core: the watch core, especially the shaft hole, is a heavy friction part, and the loss is serious with the operation of the watch core, which needs to be oiled on time to reduce the friction resistance at the time of walking, in order to facilitate the normal travel time, and has an important role in the accuracy and use of the travel time.
Grease quality regulations: good chemical reliability, to ensure long-term deterioration; Grease is not easy to volatilize, no corrosion; The viscosity should be suitable, the effect of temperature change should be small, and the freezing point should be low; To have excellent lubrication properties; To be able to do not corrode the core steel, copper and other components; There are no impurities in the oil.
Main types of grease: Domestic common 540 movement watch oil produced in Shanghai, overseas Switzerland MOEBIUS movement watch oil and so on.
The above is the introduction of the importance of lubricating oil on the tower clock core analyzed by the tower clock manufacturer. Thank you for your attention!
