1. Check around the mission area to remove all debris that hinders mission and traffic. There must be no oil on the surface to prevent slipping. The stacking of the workpieces should be equally strong to prevent smashing and injuring people.
2. Check whether the protective placement on the pipe cutting machine can be broken. If it is not installed, it will be forbidden to drive. The intermediate frequency pipe cutting machine should have excellent grounding and electrical breaking edge, and the voltage should be stable.
3. Check the smooth part of the pipe cutting machine. When the oil is low and there is no oil, the oil should be added.
4. When the empty car is running, check whether the machine is running normally, and whether the electrical switch can be used quickly. After all is normal, try the mission again.
5. When two people work together, they must work closely together and be harmonious. A person should be assigned to operate the switch. When you are manipulating, you are forbidden from talking to others to prevent mistakes.
6. The operator must not leave the machine when the machine is started.
7. When cutting the pipe machine mission, the person in the vicinity of the pipe bend stroke is banned and a warning sign is set up. Stabilize the tube when it is smashed, and stop being hit by a stick. The operator can only stand on the outside.
8. Correct the pipe to pay attention to the surrounding safety, use the steamed bread to first immerse into the water; for a few minutes, stop the handle and hurt the person. Wear gloves when knocking.
