Solution for stopping operation in machinery
Cause 1. The hammer has fallen to the bottom or the spring has been relaxed.
Solution: Lift the hammer or wind it up again.
Cause 2, the clock cabinet is not stable, unbalanced or not vertical.
Solution: Re-place the clock cabinet until it is stable, balanced or vertical.
Cause 3. The escapement fork of the movement is not adjusted to the best running state.
Processing method: adjust the escapement fork to the best running state.
Cause 4, time, minute hand overlap, unable to walk normally.
Treatment: readjust the time and minute hands to make them walk normally.
