The outdoor decoration and application effect of the tower clock is self-evident, but how to choose the right type of tower clock is not easy. So how do you fit a tower clock for a building? The following tower clock manufacturers to introduce:
The same specifications of the tower clock, the watch core of the tower clock is much larger than the watch core of the large clock, and the corresponding mother clock drive power is also large. Therefore, the engineering cost of the tower clock of the same specification is higher than that of the large clock.
In recent years, tower clock manufacturers have continuously improved the types of tower clock cores to apply to various specifications and models of tower clocks, so the engineering cost of the two tends to be close, coupled with the large clock because of glass, logistics transportation costs more than the tower clock. In addition, the tower clock has no clock glass, there will be no problems such as reflection, and the visual experience is better, so it is recommended that the tower clock be preferred.
The basic function of the tower clock is to prompt the time, and the basic incidental function is to have a backup power supply. As mentioned above, the building tower clock is a typical public clock, and the impact is very large, so it is necessary to have a backup power supply, otherwise, power failure, skipping or route problems will cause the clock to stop. Other common add-ons include hourly timing, lighting, and GPS (Global Positioning System) timing. GPS can output accurate second pulse signals, the general GPS output second pulse and the international standard time deviation is only about plus or minus one millionth of a second, and the operation is very reliable. If necessary, it can be accompanied by computer monitoring functions. If you improve some other irrelevant functions, it will make the system too complicated, but reduce the reliability of the system.
There are the following types of luminous ways: external light source lighting, clock dial light transmission type luminous, pointer scale luminous. External light source lighting can be used to directly illuminate the clock face with spotlights, simple composition, easy maintenance. Clock dial transparent type luminous: choose transparent color plate to make the clock face, install the lamp source inside the clock tower, so that the light can penetrate the clock face to achieve luminous effect. Because of the limitations of plate specifications, the clock face with relatively large specifications needs to be spliced, so it is necessary to have a clock face frame, and the frame design is good, but it has a good appreciation. Pointer scale luminous multi-purpose semiconductor light emitting tube (LED) as a lamp source, its service life is longer, if the application is appropriate, its service life can reach ten years. The pointer and the scale are made into a light box to achieve the luminous effect, because the pointer is rotating, so the brush needs to be applied to the lamp source power supply of the pointer, and the maintenance is relatively large
