The pipe cutter microcomputer controller can preset 16 angles, and the whole process can be completed in one time by using the foot switch of the pipe cutter. The rib reinforcement plan of the head part and the bed part of the pipe cutting machine is eliminated, and the internal stress is eliminated by annealing. The group has sufficient strength and rigidity to prevent permanent deformation. When the drive spindle device is directly inserted from the upper part of the machine head, it is accurate to install and easy to maintain. The spindle and the transmission sprocket are cast in groups, group processing, group hobbing, no key connection, uniform force, driven by double cylinder, bending process In the middle, the hydraulic system actively saves the buffer before approaching the angle set by the bending, greatly improving the bending precision, quick reset, saving buffer in the returning process near the starting point, greatly improving the reset accuracy and obeying. Then, the details of the necessary details in the process of cutting the pipe machine will be introduced to each other.
1. Pipe cutting machine body department: The bed body department accepts the channel welding main shaft frame, and the upper and lower bearing support plates are mounted in the frame with 15mm thick steel plates.
2. System department: The hydraulic system department can accept civil accessories or aircraft hydraulic accessories.
3. Transmission department: The transmission department consists of cylinders, racks, gears and drive shafts.
4. Mold department: The mold department is the help thing made by the differential shape diameter. It is made of bearing steel or roll steel, and the heat treatment penalizes HRC48~52.
5. Clamping department: The hydraulic clamping department consists of a skateboard, a rocker arm, and a hydraulic cylinder. The telescopic movement of the cylinder mobilizes the rocker arm.
6, the electrical department.
The pipe cutting machine is very common in the survival, and has the advantages of many functions, fair layout, simple operation and so on. But after all, they are machines. Because they are planned to be used for curved metal, they have a certain degree of damage. If they are not properly controlled, they will definitely hurt. When the pipe cutting machine drives the spindle device, it is directly inserted from the upper part of the machine head. It is accurate to install and easy to maintain. The bending main shaft and the transmission sprocket are group cast, group processing, group hobbing, no key connection, uniform force, driven by double oil cylinders. In the course of bending, the hydraulic system actively saves the buffer before the angle of the bending set is close to the bending setting, greatly improving the bending precision, quick reset, saving buffer in the returning process near the starting point, greatly improving the reset precision and Things obey.
